South-facing solar panels will perform the best for a vast majority of homeowners.
If you do not have a south-facing roof – don’t worry! Your solar panels will still be able to produce energy, just not as much.
In this article, we’ll discuss the best solar panel direction to maximize your output, and how having your solar panels facing any other direction can affect your panel’s performance.
Here is a summary of the best solar panel direction for every use case.
Your goal | Best direction |
---|---|
Maximize solar power output | South |
Take full advantage of net metering for bill savings | South |
Use a solar battery and reduce your grid reliance | South |
Minimize the impact of high Time of Use (TOU) rates | South or southwest |
Explanations are provided below.
South is the best direction for solar panels to face overall.
In nearly all situations, you will see the greatest utility bill savings and quickest payback period if your panels point south instead of in another direction.
South-facing panels have superior economics for the following reasons:
We explore each of these reasons in more detail below.
In the U.S., solar panels generate the most power when they face south.
The sun’s path means that it shines above the Equator, or close to that point. Its path never moves north of the Tropic of Cancer (23.4°N Latitude). Anyone living in the mainland U.S. is located north of that line, and for them the sun remains in the southern half of the sky all year round.
When you keep your solar panels facing south, they are essentially facing the sun all year long, allowing them to receive the most sunlight possible.
Pictured: Even during the summer solstice (June 21) – when the sun’s path reaches its northernmost point over the Tropic of Cancer (23.4°N Latitude) – it remains to the south of the mainland U.S.
If you’re in a location with net metering, the best direction for your solar panels is south.
Solar panels that face south generate lots of power, with the bulk of it produced around midday
While household energy usage tends to be lowest around that time, you’ll be left with lots of excess solar power. When you have net metering, surplus power is a good thing, as you can export it to the grid in return for generous compensation from your utility.
Learn more: What is net metering and how does it work?
South-facing panels are best if you plan to install a battery storage system such as the Tesla Powerwall or sonnen Eco.
The higher power output of south-facing panels means they can provide you with plenty of power to charge up your solar batteries, even after meeting your home’s daytime energy needs.
The power stored in your solar battery will come in handy later, supplying your home with energy during the night and providing you with backup power in the event of a grid outage.
Orienting your solar panels between south and southwest is best if your utility uses Time of Use (TOU) billing.
Where TOU billing is in place, utilities charge higher rates for electricity at certain times, usually in the form of peak rates, from 4 PM onwards.
Since utility power is so expensive later in the day under TOU, any solar power you can generate for yourself during those hours becomes more valuable.
You can increase your solar power production in the afternoon and evenings by facing your solar panels southwest, allowing them to receive more light from the setting sun.
The trade-off? Southwest-facing solar panels produce less solar power overall over the course of the day.
So should you point your solar panels southwest if you have TOU billing rates? Solar software designer Aurora Solar did a case study on the topic, and here’s what they found:
When peak electricity rates are 2x normal rates, the ideal orientation is very close to the south (see left-most image). However, once peak rates rise to 3x or 4x, the ideal orientation changes to the southwest. Image source: Aurora Solar
A solar installer can calculate the optimal orientation for solar panels on your roof based on TOU billing rates where you live.
Of course, we all have to work with the roof that we have, and you may or may not be able to achieve your desired solar panel orientation. So would a solar panel installation still be worth it for you? The easiest way to find out is with our solar calculator, which can estimate your solar panel costs and savings based on your roof direction and your utility’s TOU billing rates.
In the U.S., orienting solar panels true south (azimuth of 180 degrees solar noon) will result in maximum output. Face them any other direction, and you can expect to see a fall in solar panel output.
Solar panels see a drop in solar power production when you face them away from the true south. The size of the output drop will depend on where the solar panels are facing instead.
Solar panel direction | Achievable output* | Change |
---|---|---|
Southwest or southeast | 92% | -8% |
East or west | 85% | -15% |
North | 70% | -30% |
*As compared to south-facing solar panels; figures are ballpark estimates only.
North, south, east or west, which direction do you like the best? When it comes to solar panels, the answer is definitely south. The graphic shows ballpark figures for the output losses experienced by pointing your panels in a direction other than south.
Solar panels installed on a roof facing southwest or southeast will generally produce about 8% less power than the same panels in the same climate on a south-facing roof.
Panels mounted on a standard pitch roof facing east or west will produce approximately 15% less output than panels facing south at the same pitch.
Panels on a standard pitch roof facing north - that is, away from the sun - will produce roughly 30% less than panels facing south.
Turning solar panels away from true south will generally result in output losses of less than 30%, but in some extreme cases losses of close to 60% may be seen.
The precise drop in energy production is determined by three factors:
To state the obvious, the greater the turn away from the south, the bigger the loss in energy production. So a turn to the southwest will see a small drop, turning west will see a moderate drop, and turning north will see the biggest drop.
When it comes to latitude, the further north you are, the bigger the fall in energy production when you turn away from south.
For example, in states located at lower latitudes (such as Arizona and Hawaii), the sun is higher in the sky. In these states, solar PV panels require a low tilt to capture direct sunlight.
On the contrary, for states at higher latitudes — like Minnesota and Oregon — the sun is lower in the sky. In those states, solar photovoltaic panels should be installed at higher tilt angles in order to receive maximum sunlight.
If you compare the output produced by solar panels over a year, you’ll find that there is relatively little difference between the panels installed on a shallow (15 degree) roof and a steep (45 degree) roof.
This is because the different pitches will balance themselves out across seasons. Solar panels on a shallow roof capture more sunlight during the summer season, whereas, solar panels on a steep roof will produce more power during the winter.
While you can use solar panel trackers to keep them at the optimum angle at all times, the costs and complications involved aren’t worth it in most cases.
However, the steeper your roof, the bigger the output drop you’ll experience by having your solar panels face away from the south. For instance, in Charlotte, NC a roof with a pitch of 2/12 (9.5*) would see a 16% loss by turning its solar panels from south to north; a roof in the same location with a steeper pitch – 4/12 (18.4) – would see a much larger drop of 29%.
Barring a couple of exceptions outlined above, your rooftop solar energy system should ideally be facing south for maximum efficiency. Of course, this isn’t always possible: many homeowners don’t have roofs that face in that direction!
The good news is that this is not a dealbreaker. There are plenty of homeowners without south-facing roofs, who have solar panels installed and are enjoying huge savings on their electric bills.
Here are some workarounds for homeowners who don’t have south-facing roofs:
You can compensate for the decreased level of sunlight by installing more solar panels. In a solar panel installation, the solar panels themselves only account for a small proportion of costs; you should be able to add a few extra panels without pushing up costs too much.
This is the option that most homeowners choose when they don’t have a roof section that faces south.
You can also install a ground-mounted solar power system in your yard.
Ground-mounted solar panels allow you to position them for optimal angle and direction, maximizing your solar power output. They are also easier to maintain, as you can brush off leaves or snow without having to climb onto your roof.
The downside? Ground-mounted systems tend to be more expensive than rooftop solar panels, and they also take up lots of space on your property.
If your budget allows, consider solar panel tracking systems. They can improve a system’s output by ensuring constant, direct exposure to the sun, both during the day and across seasons. Axis trackers generate more electricity by using about the same amount of space as fixed systems.
However, it’s important to note that solar trackers are expensive. A standard 4 kW solar panel system costs you about $11,400 after incentives, but an equivalent axis-tracking system like the Smartflower costs about $20,000, or almost twice as much.
It’s important to have your panels facing a certain direction to get the best output percentage – but what about the angle at which they’re placed?
The performance of solar panels is affected by their angle of inclination. To extract maximum power from a PV system, you would have to adjust the angle based both on latitude and season.
In real situations, you often have to deal with fixed roof angles where there is no option to adjust or tilt the solar systems.
Because of this, solar systems are installed across a range of tilt angles as a means to accommodate a variety of roof pitches found on homes - effectively saving homeowners money.
The bottom line: The optimal solar panel angle can increase production, but failure to achieve isn’t a dealbreaker.
The easiest way to adjust for the impact of your roof’s direction (and tilt angle) on your potential solar panel output is by using the SolarReviews calculator.
The calculator gives us an accurate output from which we calculate the cost and savings you will get based on your local solar prices and the amount you pay your utility company for electricity.